The popularity of salt-based e-liquids has increased since its introduction. They have a higher concentration of nicotine, so they can be an excellent option for habitual nicotine users to suppress their nicotine needs.

However, these e-liquids tend to change their flavors pretty fast, and this doesn’t mean that there’s a problem with your taste buds. Quality of e-liquid, among other factors, can cause this to happen.

Here are more reasons why salt-based E-liquids change flavors quickly.

1. Inevitable Separation

Salt-based e-liquids contain certain additives and extracts. Some are heavier than others, and it’s relatively easy for them to separate. This is where different layers begin to form, depending on the number of ingredients the manufacturer uses.

When you start vaping the separated the best e-liquid, various molecules will be heated at different times, causing the flavor to change entirely. You can deal with this problem by gently shaking the e-liquid. The molecules will combine, and the taste will go back to its original state.

https://unsplash.com/photos/ahNhLfIEbqk

1. Unkempt Vape Device

Leaving your vape device untidy is another reason for the change of flavor in salt-based e-liquids.

It’s important to clean your device thoroughly after use to get relaxing and enjoyable vaping sessions. Rinsing takes only about a minute and effectively combats the strong bitter experience that will only ruin your vaping experience.

1. Unbalanced Temperatures

This mostly comes about as a result of trying out new methods at home unsupervised. Trying out new DIY flavors without prior research may cause an imbalance in flavors and tastes.

The heat may be either too high or too low. It’s worth noting that excessive heat and light may greatly contribute toward the disintegration of your e liquid’s molecular composition. The ideal temperature for the storage of vape juice is 65-72 degrees Fahrenheit.

To enhance your vaping experience, always follow the right storage conditions and temperatures. When the molecular composition remains intact, you can enjoy the original flavor of your vape juice.

https://unsplash.com/photos/pazM9TQJ2Ck

1. Delayed Replacement Of Coil

The vape coil plays a major role in heating your vape juice and keeping it vaporized. Staying for too long without replacing it will affect the functionality of your vape device negatively.

Overheating your device’s coil quickens the process of wearing it out. Consequently, you will notice sudden changes in the flavors of your e juices. They’ll begin to taste and smell differently from what you’re used to. Also, neglecting your coil affects factors such as cloud production and overall functionality.

Heavy vapers should also consider changing their vape coils every week.

1. A Vaper’s Tongue

This is a common factor that most vapers face during their vaping sessions. The most common reason for this is frequent exposure of the tongue to strong flavors. The tongue suffers adverse effects, which limits its ability to recognize certain flavors.

Vaper’s tongue is characterized by only tasting a single flavor out of a myriad of flavors. Worse still, you may not be able to taste anything at all. The remedy is quite simple. You could try out more exotic and assorted flavors to avoid putting your tongue through such experiences.

Vapers shouldn’t get too worried as this is something that clears up after about 24 hours.

If you wish to get rid of the vaper’s tongue sooner, you might also use mouthwash, unflavored e-juices, and give your tongue a break from vaping.

1. Substandard Quality Of E-liquid

Quality e-juices usually define a memorable vaping experience since cheap e-liquid tends to change faster. Moreover, you could be inhaling harmful substances.

The internet has been a reliable go-to for vapers that have a special spot for quality vape juice. All the quality brands of vape juice are listed on credible sites online.

Ensure to invest in high-quality vape juice brands since the manufacturers always know how to retain flavors for more extended periods. Check out all positive reviews to know what to expect.

Possible Solutions

If you’re always experiencing fast changes in the flavor of your salt-based e-juice, there are some tips you could try out. They include:

Practicing Safe Storage Ideas

As mentioned earlier, excess heat or light are the major causes of sudden changes in e-juice flavors. Safe storage also means placing your e liquids in a cool, dry, and dark place when not in use.

Starting Over

You’ll have to throw away your vape juice, clean up the tank, and fill it with fresh e-juice. Doing this will ensure that you eliminate leftover traces of e-juices that may have stayed longer than usual. Starting over gives you a fresh vaping experience free from awkward flavors and tastes.

Try Out Quality E-liquids

Always buy high-quality e-liquids for the best vaping experience and flavor.

https://unsplash.com/photos/Kwcv9UiImLY

Final Thoughts

Several factors could cause the flavor of your salt-based e-liquid to change. Following these tips to the latter will ensure that you get the most out of your vaping sessions.

The post Why Does Salt-Based E-Liquid Change In Flavor appeared first on Vapolution.

Source: pixabay.com

The difference between an expert vaper and a novice lies not just in techniques and choice of flavors, but also in the many ways they handle the vape devices. With time, vapers need to learn the intricate details of their device, what different problems with your vapor indicates, and the many tips and tricks to take good care of the device to elongate the lifetime and relish a pleasurable vaping experience.

For example, the hint of burnt taste or the lack of flavors in your vapor indicates that the vape coil has reached its lifetime. Honestly, it is a dreaded moment for every vape enthusiast. It means that the next few vapes are going to taste blank, and you have no choice but to replace the coils.

If you are worried about replacing your coil too often, then here are some simple tips that will guide you on the many ways to ensure your coil lasts longer and gives you a wonderful experience.

1. Create A Cleaning Routine

One of the most common problems leading to a reduced lifetime of vape coils is lack of cleaning. Vape devices accumulate gunk or sediments overtime. Based on the frequency of use, the need for cleaning might vary. But keeping a proper cleaning routine for the device is essential to make sure you get to enjoy the flavors of the e-juice.

Steps to clean your device

• Remove the coil from the device.
• Eliminate excess e-juice from the coil.
• Rinse it under running hot water. It helps to remove any debris or residue from the partially heated e-juice that might be stuck to the surface.
• Air-dry the coils and make sure to remove excess water between the wraps.
• Replace the coils in the device and switch on the power button.
• Double-check that the coil starts to get heated evenly.
• Once you are sure the coil is heating up properly, refill the tank and enjoy vaping.

Follow this cleaning routine every few days. For frequent vapers, you might need to follow the ritual at least once a week to keep the coil clean. These simple cleaning steps can ensure your coil lasts longer than usual, as it helps to provide even heating that reduces damages to the part.

2. Don’t Forget To Break In New Coils.

Today`s vape devices are fairly simple to work with. If your coil is old or burned out, it is easy to replace it with a new one. But an important point to remember here is replacement coils also require some breaking in before it is ready to be vaped. Simple screwing in a new coil will reduce longevity and could also ruin the experience.

Source: pixabay.com

• Priming the coil before starting to vape is essential to prepare it for the process. Priming refers to saturating the wicking material in the vape juice. It reduces the chances of burning the wick and the coil. Place a few drops of juice through the holes of the vape body to saturate the wick after installing the new coil.

• After filling the device with e-juice and installing the battery, take a few dry hits without clicking the fire button. It helps to create a path for the juice to reach the wick from the tank.

• Coils go through wear and tear from expanding during heating and contracting during cooling. One of the best ways to avoid the intensity of wear and tear is to start vaping in lower wattage. Take short hits while working with a newly installed coil to give it some time to adjust to the heat settings. You can slowly increase the temperature range to reach your normal settings.

These simple break-in steps help to maintain the coil and ensure longevity.

3. Say No To Dry Hits

Burnt hits or dry hit refers to a vaping experience when there isn’t enough vape juice in the tank. The absence of juice to heat causes the wicking material to burn faster, thus ruining the coil as well.

• Keeping proper levels of e-juice in the tank while vaping is very important to make sure there are no dry hits. Make sure the tank is at least half full to provide a proper link between the juice and the coil for the best experience.
• Never use your coil without priming. Saturating the coil with vape juice before taking a hit, especially after installing a new one, helps to create a pathway from the tank to the coil. It reduces the risk of burning the wick.
• Take a few seconds between the hits. Giving your coil a little time to cool down before heating up again improves the heating accuracy without leaving the device dry.
• Avoid vaping at high wattages regularly. It helps to improve the longevity of the coils as the expansion and contraction are optimum.
• Don’t over press the fire button. Use a puff to analyze the vapor and understand when and how long to fire the device. It helps to vaporize the liquid under optimum heat that protects the coil integrity.

4. Avoid Chain Vaping:

Chain vaping refers to continuous vaping with no breaks between the puffs. It could cause a lot of damage to your coil. The continuous stress on the coil from heating could be intense. Also, continuous vaping does not provide enough time for the wick to be saturated with e-juice, which increases the chances of burning.

Continuously vaping for a long period could lead to a diminished flavor in your vapor. At this point, it is best to pause for a while before putting your device to work again. Giving the coil enough time to soak in the juice can be helpful to increase the life of your coil.

5. Say No To Some E-juice:

Some e-juices contain constituents that can cause damage to your coil and reduce their lifetime. Vape juices high on VG or vegetable glycerin or those with excess sweeteners tend to be more viscous. This viscosity makes the priming more difficult as compared to other liquids. It also increases the sediment build up on the coil. Hence the chances of burning out the coil and wick are higher while using these liquids. Choose juices with less than 70% VG concentration for a wonderful experience without damaging the coils.

Conclusion

Stick to average wattage limits and temperature settings to prolong the lifetime of your coil. Take good care of your device to improve the health of your coil. Follow the simple steps from above that help to protect your coil from damage and increase its lifetime effectively.

Learn how to clean your vape coils below:

Here’s a video that show you how to clean your vape coils and how to make them last longer. Check it out below!

The post How To Make Your Vape Coil Last Longer appeared first on Vapolution.